Operating instructions

DV-IP RT

Add Still Image This will record a still image of the trigger along with the standard

recording. This can then be sent on to an external destination.

Email Image If this option is selected, a JPEG will be added to the reporting

email (if Email Reporting is selected).

Protect alarm Images

Alarm images can automatically be protected from

being overwritten

Switch Spot Monitor Select to display the alarm zone Primary camera on the Spot

Monitor.

Goto Preset It is possible to action a camera to automatically be sent to a

preset position when an alarm is triggered.

VMD/Activity Inhibit Select to inhibit (ignore) the VMD/Activity detection feature. Refer

to ‘Activity Setup’ for more information.

Email Reporting The unit can send an email when an alarm is detected, refer to

‘Network-E-mail’ for more information.

Preset Camera The preset camera is the camera which will be sent to a

designated preset position upon alarm activation.

Preset Enter the preset position number for the selected camera here,

refer to ‘Unit Operation-PTZ Program’ for more information on

establishing camera preset positions.

Relay Select an onboard or external relay to automatically close on

receipt of an alarm.

Relay Duration Enter (in seconds) how long the relay is to remain closed.

Alarm Image Snapshot Delay This gure allows a delay to be introduced before an alarm

snapshot is taken. This is used when the alarm relates to a PTZ

camera which has to travel to a preset position.