Operating instructions

DV-IP RT

Zone Input

This menu allows the conguration of established alarm zones. An alarm zone can be established

to logically groups alarms and initiate actions when an alarm is activated, there are 32 congurable

zones. A single or multiple trigger can be used to generate an alarm. It is possible to allocate up to

32 alarm zones to carry out a combination of actions. Use these options in conjunction with the Zone

Actions menu.

Entry timer This is the number of seconds allowed for the user to enter the

zone and disable the alarms. If the alarm is not disabled within

this period the alarm will be triggered.

Exit timer This is the number of seconds from the alarm being set within

which the user must exit the set zone. If the user is still within the

zone after this time period the alarm will be triggered.

Zone An alarm zone can be established to logically groups alarms

and initiate actions when an alarm is activated, there are 32

congurable zones.

Title This information is stored along with the relevant images in the

database, ensure this has relevance to the alarm zone.

Pre-Alarm sec This is the time period prior to the start of the alarm included

with the alarm recording for archive. These images will also be

protected from being overwritten.

Note: It is recommended that the Pre-Alarm option be set to the same value as the Pre-Trigger

setting in the “Prole Record“ menu. This will ensure successful playback of high quality

Pre-Trigger images. High quality pre-trigger images will only playback properly if review

(playback) starts prior to the pre-trigger initiation.