Operating instructions

DV-IP RT

Alarm Settings

The Alarm Settings menus allow conguration of the unit’s alarm functionality. Individual alarm inputs

and alarm zones can be congured. Global relays can be activated and the Activity grid set up.

Refer to the individual menus for further details.

The Alarm Input page allows conguration of alarm channels. Up to 20 alarm channels are available.

The Zone Input page enables the conguration of alarm zones. Up to 32 separate alarm zones can

be created.

The Zone Actions page enables actions such as Go to Preset or Archiving to be allocated to alarm

zones. Zones can also be associated with a specic camera. On receipt of an alarm, images from

the associated (primary) camera will automatically be displayed in the Viewer menu.

The Activity Setup page allowed activation and conguration of the Activity feature on all video

inputs. The Activity feature enables cameras to automatically detect any movement/changes within

the video scene. This can trigger a number of operations such as FTP alarm notication or an

increase in the recording rate.

The Activity Response page enables conguration of responses following an Activity

Detection trigger.

The Global Relays page allows the four onboard relay connections and global relay settings to be

congured.

The VMD Conguration page enables the unit’s VMD (Video Motion Detection) to be set-up. VMD

allows a camera to automatically detect if there is any movement/changes within specc areas of

the video scene.