Operating instructions

DV-IP RT

Advanced Record

Menu View Switch to the Simple Prole Record menu.

Note: When Advanced Record settings have been changed, it is not possible access the Simple

Record menu until the newly congured Advanced Record settings have been applied. To

do this, open the Record menu and select the ‘Save’ option. It will then be possible to return

to the Prole Record menu and access Simple Record.

Days Recording Displays the record duration possible using the current

conguration.

MPEG4 Compression If using MPEG4 recording, edit the number of P-Frames recorded

before a new I-Frame (keyframe) will be taken.

Note: Taking a new I frame once per second when recording above 5pps is recomended. When

the unit rewinds and fast forwards through recorded video, it will access I frames only (and

skip P frames). Having too long an interval can make viewing the images in these modes

difcult to follow. Note however that too short an interval will reduce the benets of lower bit

rate MPEG4 recording.

Channel Enables selection of a specic camera for editing.

Copy To All Select to copy the current prole record settings to all camera

channels.

JPEG Pre-Trigger Rate (pps) The Pre-Trigger feature will buffer and store alarm recording prior

to an event trigger (in JPEG format). It will use the maximum

available memory dependent on other cameras requirements of

the buffer space. Enter the record rate (in pps).

Unset/Set/Override Normal Shows the recording prole used by the camera if no Timed

Schedules are applied and the camera is operating under Normal

(non Event) conditions. Refer to ‘Schedule’ for further information.