Operating instructions

Dedicated Micros ©2009
61
DV-IP RT
Prole Record
It is possible to set the unit recording conguration based on specic priorities. The MultiMode recording
feature offers the ability to set different recording rates, resolutions and compression formats across
unset, set and overide modes for each individual camera. By varying the quality, bit rate and le
size of recorded images, the MultiMode function enables the recording capabilities of the unit to
be greatly increased. The Prole record menu can be accessed in a Simple format or in Advanced
mode. The Advanced mode offering greater opportunities to dynamically edit individual cameras
recording capabilities.
Simple Record
Menu View Switch to the Advanced Prole Record menu.
Days Recording Displays the record duration possible using the current
conguration.
Channel Enables selection of a specic camera for editing.
Copy To All Select to copy the current prole record settings to all camera
channels.
Pre-Trigger (JPEG) Enablng the Pre-Trigger feature will buffer and store alarm
recording prior to an event trigger (in JPEG format). It will use
the maximum available memory dependent on other cameras
requirements of the buffer space. Select ‘Enable’ to activate.
Note: It is recommended that the Pre-Alarm option in the ‘Alarm Settings-Zone Input’ menu be set
to the same value as the Pre-Trigger setting. This will ensure successful playback of high
quality Pre-Trigger images. High quality pre-trigger images will only playback properly if
review (playback) starts prior to the pre-trigger initiation.