Operating instructions

DV-IP RT

Map Cong

This menu allows images to be imported and used as maps that can be displayed in the Viewer

Menus. The map can then have hotspots added to allow quick navigation to individual cameras.

An overview ‘System Selection Map’ can also be added to navigate between different systems.

Congure Map Select the relevant system using the drop down menu, or use the

‘Overall System Selection Map’ option to create a map to navigate

between systems.

The Overall System Selection Map will display all available

numbered systems. Selecting a hotspot then opens the relevant

System camera map.

Graphic Location Enter the location of the relevant map graphic, including the full

I.P address of the server holding the map. The map image will be

displayed if linking is successful. The linked map can be in gif or

jpeg format and should not exceed 500 by 350 pixels.

Map Screen Offset These co-ordinates represent the top left corner of the map

graphic as displayed in the Viewer menu.

Camera Select Select which camera is to be linked to the created hotspot.

Activate Hotspot Select to activate and display the camera hotspot.

Hotspot Radius Enter the radius (in pixels) of the hotspot.

Increment by If using the Decrement (Red) or Increment (Green) buttons, enter

the size (in pixels) that the hotspot will increase/decrease.

Decrement (Red) Select to reduce size of hotspot.

Increment (Green) Select to increase size of hotspot.

Hotspot X coord Use to position the centre of the hotspot along the X axis e.g.

entering 20 would place the hotspot centre 20 pixels from the left

edge of the map.