Operating instructions

DV-IP RT

Webcam Support Select this option to activate the Webcam function. This allows the

unit to emulate a webcam and send image from one video feed

in webcam format, refer to ‘Network Settings-Web Cam’ for more

information.

Note: When de-selected here, the ‘Web Cam’ menu will no longer be displayed in

the menu tree.

SMB server support Select this option to activate the SMB (Server Message Block) le

sharing function.

When activated, the SMB protocol allows the unit to access PCs

operating the Windows operating system (and Linux machines

running Samba). This enables sharing of les and directories

to/from the unit. The name of the SMB Workgroup on the network

must be correctly entered in the SMB Workgroup option (see

below). It is important that the Server Name assigned to the

unit via ‘Network Settings->Server Name’ is unique within the

workgroup being used.

To access the unit via a PC running SMB (and has access to

the same Workgroup); open My Network Places-Entire Network-

Microsoft Windows Network. The Workgroup containing the unit

and PC(s) should then be available. Files and folders can then be

copied/added as required.

Note: Use the 10/100Mbps network option ‘Net 2’ for SMB purposes (the unique Server Name

must be assigned via ‘Network Settings-Server Name’.

Deinterlacemask Select this option to improve display clarity and minimise the

comb effect that may be visible when recording high motion

scenes in 4CIF mode.

Use Record Proles For Tx Select this option when units required Video Tranmission prole

(rate/quality/resolution) is identical to that being recorded.

Secondary Web Port If the default port setting for web serving has already been

allocated, it is possible to congure a second port number

i.e. the secondary web port can be set to 8000 if the default web

port (80) is blocked by the network or rewall.

Telemetry Port Enter the port settings for telemetry data here. The default setting

is 1025.

SMB Workgroup Enter the SMB (Samba) Workgroup details.

Note: A unit reset is required to activate/update SMB Workgroup details.

User Logging Enable this option to activate User Logging. Refer to ‘Appendix C’

for further information regarding the User Logging function.

Comb Filter Enable this option to activate the Comb Filter function. Comb

Filter can help improve the ne details of a video signal image by

ltering the luminance and chrominance separation process.