Operating instructions

DV-IP RT

Time and Date

This menu allows the time and date to be set on the unit. Required timezone information can also be

established and the unit time synchronised to that of the PC being used to view the webpages.

System Time The current system time and date is displayed.

Current Time Zone Displays the currently selected time zone settings.

Time Format As default, the time displayed is in 12 hour format. This can be

changed to 24 hour if required.

Date Format As default, the date is entered dd/mm/yy. It can also be displayed

as mm/dd/yy or yy/mm/dd.

Set Time Enter a current time for the unit.

Set Date Enter a current date for the unit.

Time Zone Select the relevant timezone offset from the accompanying drop

down menu.

Note: Time Zone changes will only take effect after a unit reset.

SNTP Server A Simple Network Time Protocol (SNTP) server allows external

devices to connect and set their current date and time settings to

that of the SNTP. If required, enter the SNTP server IP

address here.

PC Time Displays the system time of the PC currently being used to view

the webpages.

Sync Time (Blue) Use this button to synchronise the time of the unit to that of the

PC being used to view the webpages.

Note: The PC Time and Sync Time options will only be available if viewing the menu via

the webpages.