Operating instructions

DV-IP RT

RS232

RS485

Note: Refer to Appendix A for further guidance on Serial Port pin allocation for

Telemetry cameras.

Step 9 Connecting a Keyboard

The DV-IP RT supports Dedicated Micro keyboards DM/KBC1 and DM/KBC2. Connect either of

these keyboards via the KBD connector situated on the rear of the unit.

Note: Refer to ‘Unit Operation’ for further guidance regarding supported keyboards.

Step 10 Connecting Telemetry Cameras

Simple Dome Connection

All Domes used inconjunction with the unit should be set with RS485 unterminated at the Dome.

Pin connections for RS485 connection to a dome on serial port 3/4 are:

Dome Cable DV-IP RT Serial Connector

Yellow 1 TX+

Green 9 TX-

If the dome is being connected using an RS485 connection, the dome address should be set to

match the camera input number on the DV-IP RT i.e. if the dome is connected to video input 3, the

camera address should be ‘03’.

DM 2040 & 2060 Domes

A DM 2040/2060 Dome can be connected via either co-axial telemetry or RS485 twisted pair.

If using co-axial telemetry the address switches should be set as:

Blue switch - F Yellow switch - D