Operating instructions

Dedicated Micros ©2009
121
DV-IP RT
PTZ Program Option
The Program page allows preset settings for PTZ cameras to be established and an ‘Origin’ base
position established for a camera.
Note: This page will not be available for all cameras.
Red Dome Select to display the Dome Menu page.
Green Store Use to save the current view as a Preset for this
camera. Press this button then a preset position
(using the numeric keys on the IR Remote
Control or optional Keyboard if viewing via a
local monitor).
To re-send the camera to this position, select
the camera, then press Next -> Preset -> (preset
number).
Note: When entering a new preset, any previous preset assigned to that number (for the same
camera) will be overwritten.
Yellow Select This option will send the camera to
the stored ‘Preset1’ position.
Blue Set Origin The Origin option allows a base position to
be established for the Oracle dome camera.
The camera will register this position as zero
degrees. Any command that sends the camera
to a coordinate will use this origin as its starting
point, refer to ‘Console Settings->Map Cong
->Hotspot Origin’ for more information.
Note: This option is only available for Oracle dome cameras.
Purple Back Return to the previous page of the Viewer menu.