Operating instructions
Dedicated Micros ©2009
118
DV-IP RT
Telemetry Camera Options
The Telemetry camera page allows Oracle Dome cameras to be controlled directly via the Point&go
feature and be sent to preset positions.
The eZoom feature allows navigation within the video image i.e. the image itself is being navigated
and enlarged, the camera is not being controlled. This allows the operator to pan and zoom within
the actual image. This feature is best utilised with high resolution cameras, giving the operator the
ability to electronically zoom into an area. The unit will request a higher resolution image of the
zoomed area to show increased detail.
The functionality available will depend on the type of camera being viewed. The unit will recognise
which camera type is being accessed and display relevant symbols in the top right of the screen
(when viewing via a local monitor only).
Red Preset If Preset positions have been established for the
PTZ camera, select the Preset option followed
by the relevant numeric button or via the number
box displayed on-screen.
Refer to the ‘PTZ Prole menu’ for further details
on establishing preset positions.
Note: Presets will not work in ePTZ mode.
Green PTZ/ePTZ Switches between PTZ and ePTZ mode. In ePTZ
mode, it is possible to zoom in/out of and scroll
around the image (the camera itself is not being
controlled).
PTZ mode will control an Oracle Dome camera
via the Point&go feature. Refer to the ‘Point&go’
section for further information.
Yellow Aux Activates the camera Auxiliary controls e.g.
wash, wipe etc. Press the Aux button followed
by the relevant numeric button or via the number
box displayed on-screen.
Blue Prog Opens the Preset programming menu. Refer to
‘PTZ Prole’ menu.
Purple Next Opens the next page of the Viewer menu.
Note: The above menu options will only be available when viewing a PTZ camera in Live mode.