User manual

DV-IP User Manual v1.01 Feb 28
th
2003
DV-IP User Manual
8
Q
Q
u
u
i
i
c
c
k
k
S
S
e
e
t
t
-
-
u
u
p
p
This guide will show you how to set up a simple multi-camera system to record and view.
1. Firstly, complete the steps above to configure the unit for network operation.
2. Open a web browser and type in the unit’s IP address to access the unit
3. After a moment, the live page will load, with or without an image, dependant on whether
you have a live camera connected.
4. When the live page has loaded, press Config in the upper right of the screen
5. If a user name and password are requested, the default user name is ‘dm’ and the
password ‘web’
6. From the Main Setup menu, select Cameras, then Camera Set-up
7. In the camera set-up screen, click the Connected tick box for each camera you have
attached to the unit. Also ensure the Terminated tick box next to each is ticked, unless
you have video on loopthrough to another device
8. Click the Save Icon on the lower right of the screen to save your settings –