User manual

DV-IP User Manual v1.01 Feb 28
th
2003
DV-IP User Manual
45
If you wish to define multiple user names and passwords for a unit, add each new user name and
password below the existing one:
e.g. existing info:
[FTP]
dm=web
to add user names and passwords, just add below the existing –
[FTP]
dm=web
user=password
third=here
another=user
USERS.ini File
# DV-IP v1.0 12-12-02
[FTP]
dm=ftp
[Telnet]
dm=telnet
[Serial]
# serial=password
WEBUSER.ini
The WEBUSER.ini file holds user names and passwords for accessing live view, playback and
configuration. It also holds user name and password details for when accessing the unit via DV-IP
Viewer.
To change the user name and password, locate the existing user name and password for each section
(these are highlighted in blue in the sample file below). The file below is set up for password protected
Configuration. To enable password protection for the each other section, remove the # sign in front of
each ‘object =’ line up to the user name and password lines.
To remove password protection, add a # to the start of each ‘object =’ line for the relevant section. If two
or more user names are desired, add each new user name and password below the existing information,
WEBUSER.ini File
#
######################################################
# Webuser Version DV-IP v1.3 (10-12-02) #
######################################################
#
#
[UNlock]
object=frmpages/dvip_unlock.shtml