User manual
DV-IP User Manual v1.01 Feb 28
th
2003
DV-IP User Manual
41
Viewscreen
This is where images are displayed. Images in this screen can be
images of a single camera, quad display, 9-way or 16-way. At the top
of the viewscreen, the grey bar shows (from L to R) Camera Number,
Camera Title, Date, Time (24 hour).
Right clicking on the display will copy the image to the Windows
Clipboard, where it can be pasted into another application. This works
for all views – a 16-way view will be copied in the same way as a
Single.
View Selection
The type of display is selected from the buttons above – from left to right: Single Camera, Quad View,
9 Way, 16 Way. Quad views and above take their cameras in sequential order from the first selected
camera, so in a quad view, selecting camera 1 will give cameras 1 to 4, selecting camera 5 will give 5 to 8
and so on.
Resolution Selection
There is a choice of 3 resolutions – high, medium and low – the actual image resolution and file size
settings for each button are set up in the Camera Set-up page.
Camera Selection
The available cameras can be selected from the above buttons – those available are pictured in blue,
whereas others are greyed out and cannot be selected. The first selected camera is marked in red.
Telemetry Control
Once telemetry is set up in Configuration, complete control of
the PTZ cameras is possible. The Joystick offers movement in 8
directions, and the speed of movement is controlled using the plus
and minus signs – the current movement speed setting is
displayed in the number box (0 in the picture).
The telemetry controls are (from left to right):
Top Row: Zoom In, Zoom Out, Patrol, Lights On/Off
Middle Row: Iris Open, Iris Close, Washer, Wiper
Bottom Row: Reduce Movement Speed, Current Speed, Increase Speed
Preset Control
The control offers up to 100 presets, dependent on the ability of the PTZ camera.
Presets are defined by clicking the number buttons (from 0 to 99) to select a preset,
moving the camera to the desired position, then right clicking the last number
depressed. This will bring up a confirmation box like so:
Once OK is clicked, the preset is stored, and can be
activated by clicking the numbers and then the Arrow button
above the display field.