User manual

DV-IP User Manual v1.01 Feb 28
th
2003
DV-IP User Manual
36
WebCam Enable - This sets when the WebCam updates are enabled to the host system.
Disabled - WebCam updates are never performed. This is intended to temporarily disable
the all WebCams without clearing the Camera Selection mask.
Enabled when system SET - WebCam images will only be updated to the host server when
the system is in the SET mode. SET and UNSET modes are selected by contact or the
schedule.
Enabled when system UNSET - WebCam images will only be updated to the host server
when the system is in the UNSET mode. SET and UNSET modes are selected by contact or
the schedule.
Always Enabled - WebCam images will be continuously updated to the host server.
Relay Test Page
This page is used to test the 4 on-board relays or optional 485 BUS expansion ROM modules