User manual

DV-IP User Manual v1.01 Feb 28
th
2003
DV-IP User Manual
32
\ ETC \ paths.ini file in the DV-IP Web Server Area.
Off - Disables the communication port.
Telemetry Options
Note:- Enabling RS232 telemetry disables coaxial telemetry.
Telemetry Type - Options available:
Ademco (VCL) - Maxcom Matrices (RS232)/Video Controls Ltd
American Dynamics Matrix (RS232)
American Dynamic Matrix 168 (RS232)
Building Block Video - TX1000 or TX1500 + BBus-Interface Matrices
Dedicated Micros (RS232) star commands
Off - Disables the communication port.
Telemetry Matrix Monitor – Selectable when RS232 telemetry is enabled. This provides
control over a specific matrix monitor output on a Matrix.
Telemetry Image Compression – Forces a higher or lower compression rate to images
when telemetry cameras are moved.
0 = off, 8 to 255 are the telemetry compression options.
8 being the lowest compression value providing a high resolution image.
255 (default setting) being the highest compression value providing a low resolution
image. Values of 1 to 7 are not accepted or used.