User manual

DV-IP User Manual v1.01 Feb 28
th
2003
DV-IP User Manual
21
E.g. If the Zone Alarm Input is attached to Door A and the AND input attached to door B, an
alarm event will be triggered only if BOTH doors are open at the same time.
Zone NOT Input - User definable double-knock option. Only if the Zone Alarm Input
receives a trigger but the Zone NOT Input does not receive a trigger - the DV-IP will go into
alarm.
Using a similar example to above, where the Zone Alarm Input is on Door A, and the NOT
input on Door B, an alarm event will only be triggered if Door A is open and Door B closed
(i.e. NOT open)
Select Zone Cameras - Cameras grouped to a zone. When the zone goes into alarm, all
grouped cameras will be part of the alarm sequence, and affected by their ‘On Alarm’
settings.
Alarm Zone Actions
These variables specify the actions taken when the zone is in alarm:
Text Only – Any alarm will be text only, accompanied by no video images. This may be used
when a zone has no associated cameras.
System Set - Enables the alarms when this alarm/zone receives a contact change.
Create Database Entry - Adds this alarm to the Events Database using the Zone Title.
Change Standard Record Rate - Changes the cameras defined in the Standard
Recording page to the alarm record rate specified.
Change Variable Record Rate - Changes the cameras grouped in the zone and defined in
the Variable Rate Recording page to the individual alarm record rates defined.
Report on Alarm - Connects this zone to DV-IP Viewer on alarm - defined in the Alarm
Reporting page.
24 Hour Alarm - This forces the zone alarm to be active 24 hours a day.
Record Still Image - Records a single image at the time of the alarm in addition to the
standard recording sequence.
Protect Alarm Images - Write-protects the alarm images on disk associated with this zone
for the period defined in the Alarm image protect period field.
Archive Alarms - Marks the zone alarm for Automatic FTP Download (see FTP Download
page)
Goto preset - Drives the selected camera number to a pre-set telemetry position on alarm.
Close Relay - Closes either On-Board Relay-4 or optional relays 1 to 16 on ROM Module-1.
Apply To All - Sets all the alarm zones to use the alarm zone actions specified.
Save settings - Saves the configuration of all the alarm contacts.