User manual

DV-IP User Manual v1.01 Feb 28
th
2003
DV-IP User Manual
12
IP, then the video image will not be viewed or recorded correctly.
Mono - If ticked the DV-IP will expect to see a monochrome (B&W) camera.
Coax Telemetry - Determines the coaxial telemetry type on each camera as either BBV
(Building Block Video), Pelco or OFF.
Cam-Fail Reporting - Treats camera fails as an alarm on which to dial/connect if enabled in
Alarm Connection Settings page
Note - When Coaxial Telemetry is enabled, RS232 telemetry will not be selectable,
and vice versa.
Some settings will require a unit reset after saving. To reset the unit, access the Reset page
from the System menu.