Operating instructions

DV-IP Server

Serial Ports

This menu allows conguration of the unit’s Serial ports. Refer to ‘Installing the DV-IP Server’ forRefer to ‘Installing the DV-IP Server’ for

installation information.

 

  

Select from:

    

    

PPP Sets port for Point to Point Protocol

Telem Sets port for Telemetry purposes

Comm Sets port for Comms purposes

EPOS Sets the serial port for connection to an

EPOS (Electronic Point Of Sale) device

 





 



Note: When a telemetry protocol is selected, these settings will default to pre-determined values

and should not normally be altered.

 



Note: Refer to ‘Appendix E’ for a full list of supported telemetry protocols.