DS2 Setup Guide

ManualsBrandsDedicated Micros ManualsElectronicsDigital Sprite 2, 16-Channel Hybrid Video Recorder, 160GB Hard Drive

DS2

Activity Camera Setup

Activity detection is used to record more images to disk from cameras that have activity. The

sensitivity of activity can be adjusted and areas can be masked off according to the scene type.

Camera 1

Detection

Schedule Activation

Sensitivity

Activity grid

Activity test

Actions

Advanced VMD zone

Edit

Indoor high

Setup

Yes

Edit

Off

Indoor Low, Outdoor High,

Outdoor Low, Very Low

Setup

Walk test

Enabled

ctivity

etup

Camera

Each camera can be individually congured. Select the camera by pressing the corresponding

camera key.

Detection

Select whether activity detection is ‘On’ or ‘Off’ for the selected camera.

Note:

If Detection is disabled, the sensitivity setting will still be used for Event Search.

Schedule Activation

Each camera can be scheduled to be always enabled (24Hr Activation) or individually activated

during the day, night and at weekends.

Activation Type

Active

Schedule Activation

Day Night Weekend

24 Hour Activation

chedule Activatio

Sensitivity

There are 5 levels of sensitivity for activity detection to ensure any scene environment can be

covered.

Note:

When setting the sensitivity it is recommended that an Activity test is run to ensure the

correct sensitivity is selected.

Select the sensitivity level to suit the camera location: