DS2 Setup Guide

Dedicated Micros ©2007
8
DS2
Copy Images to CD/DVD or FTP Server
Using the Copy Images Menu
1. Insert a blank CDR/DVD-R into the CD/DVD
drive of the unit.
2. Press and hold the COPY button to display
the following screen.
3. Use the cursor buttons to change the time
to copy ‘to and from’.
Copy Images
Copy destination
Copy from time
Copy to time
Watermarking
Unprotect on Archive
CD-R CD0:
15:41:00 01/03/2006
15:45:00 01/03/2006
Enabled
Disabled
Copy destination This is the name of the internal CD/
DVD drive of the unit or the remote
FTP server.
Copy from time Select the time you wish to copy
images from.
Copy to time Select the time you wish to copy
images to.
Copy Select ‘All cameras’ or individual
cameras to copy using the camera
buttons (lled boxes are selected
cameras, unlled boxes are not
selected).
Watermarking A unique watermark can be added
to the images as it is copied to it’s
destination.
Unprotect on archive If an image has been manually or
automatically protected it is possible
to remove this protect when the
image is archived, to ensure
archived images will be over-written
This menu displays the disk archive list with a list of
images that are to be copied to the CD/DVD or FTP.
If CD is selected, the ‘CD Use’ bar indicates the how
much space is available on the CD/DVD. Once it
reaches 100%, no more images can be added to the
archive.
Add next Add the selected times to the archive list.
Clear list Removes all entries from the list.
Archive This will start the archive process to the
CD/DVD.
Archive& Verify If you want to verify archiving has been
successful, select this option instead.
To select any of the above options, highlight the
option and tap MODE. To add images:
1. Select ‘Add next’ and press the MODE
button to add the displayed time to the list.
2. You may wish to add more images to the
CDR archive if the CD/DVD is not yet full.
To select more images to add to the list
press ‘rewind’ to return to the ‘Copy images’
screen.
3. Once all the required images are added to
the archive list, select ‘Archive’ or ‘Archive
& Verify’ (only available if archiving to CD/
DVD). To archive to the internal CD/DVD
drive, press the MODE button to create the
CD/DVD. If the images are to be sent to an
FTP server, ensure the FTP settings have
been correctly congured in the “Record
Options - Archive on Event’ Menu, then use
the MODE button to FTP the images.
4. Please wait ‘archiving in process’ will be
displayed, it will also show the percentage
complete of the archive process
5. Press and hold the MODE button to exit the
Disk Archive List page.
Using the Copy option during Playback
It is possible to copy playback images to the Disk
Archive List while reviewing the images. This provides
the Operator with a simple process of selecting
images that are of interest to be automatically copied
to the Disk Archive List for burning to a CD/DVD.
1. Press rew to return to the start of the
recorded les that are to be copied.
2 Press play and immediately press the
COPY key, a message will appear to say
the images are being copied.
3. When the end of the recorded images are
reached press the COPY key again to stop
the copy process.
4. Conrm the les have been added to the
archive list by selecting the Disk Archive List
menu.
Using the Copy option within Event Log
Within the Event Log it is possible to highlight an
event and copy this to the Disk Archive List for
copying to a CD/DVD.
1. Press the EVENT button to display the
Event Log screen.
2. Using the
keys to highlight the event to
be copied.
3. Press the COPY key, a message will be
displayed to say the event has been copied.
4 Conrm the les have been added to the
archive list by selecting the Disk Archive List
menu.
Viewing across a network
The unit can use either a Web interface or network
viewing software to view images across the network.
The network viewing software can be downloaded
directly from the unit onto your local PC using the
network connection, refer to ‘Downloading the Viewer
from the Unit’ for details.