DS2 Setup Guide

DS2

Write Once Last Reset

This displays the time and date the Write Once process was last reset.

Schedule Rates

This option is enabled by default. With ‘Schedule Rates’ enabled, the unit provides the option

to congure record rates for day, night and weekend operating mode in the ‘Standard Record

Schedule’ and ‘Variable Record Schedule’ menu. Disabling this option will switch the scheduled

recording options to a single set of rates to be used in all schedule (day, night, weekend) operation

modes.

Local 4CIF interlace

This can be switched on if the system will be used to record using the 4CIF settings, and will

eliminate the comb effect that may be visible in a high motion recording environment. It is not

required if not using 4CIF, and may not be required if not recording high motion.

Record Text in Images

The record text in image when enabled has an Edit option to display the submenu for record text

conguration.

Display Text

The text displayed can be automatically removed from the screen after a user dened time or

alternatively the text shall remain on the screen indenitely (default). Select the number of seconds

up to 999 sec maximum.

Keyword Events

When this option is selected to All cameras the unit will add a keyword event trigger to the event

database for every matching word. This can then be accessed via Event Log (press the Event key

on the unit). A Keyword (K) event entry will be displayed as well as the corresponding Zone events,

the K entry will detail the keyword that caused the event.

If this option is set to None then the keyword will still be available as triggers for Zone events.

Record Audio

Selecting Edit next to the Record Options menu entry will open the Audio Conguration menu. Three

channels of audio are recorded on the Digital Sprite 2; there is a choice of two local audio channels

and a single remote channel. This menu will enable or disable audio recording.

The options are:

• Audio Sampling - Audio can be recorded at 8Hz, 16Hz or 22Hz.

• Audio in 1 & Audio in 2 - Enable when recording through the audio input. Audio 1 is

associated with Camera 1, Audio 2 is associated with Camera 2.

• Remote Audio - Enable this to record network audio from NetVu ObserVer

• Audio Output 1 - Enable this to be able to send audio signals out of the unit via Output 1

(typically used to send audio to a remote speaker).

• Audio Output 2 - Enable this to output the audio from the camera being viewed, either

Camera 1 or Camera 2, mixed with network audio to a local control room speaker.

• Audio in Level/AGC- This option allows the Audio in level to be set, between 0 and 15. This

is the base setting from which the Automatic Gain Control (AGC) will operate.

• Audio out 1 Volume - This unied setting controls the level at which audio is sent via both

Audio Output connections.