DS2 Setup Guide

Dedicated Micros ©2007
68
DS2
Telemetry Type
When the telemetry option is selected within ‘Port Usage’, the RS232 and RS485 serial protocols
supported on the unit will be displayed.
The unit supports numerous protocols for control of PTZ cameras, Dome cameras and analogue
control equipment. The supported analogue control equipment protocols are:
Option Manufacturer
DM-Serial Dedicated Micros
Philips 232 Bosch / Philips
AD-Matrix American Dynamics
AD168-Matrix American Dynamics
BBV-Matrix BBV
VCL-Matrix VCL/Ademco
The supported PTZ / Dome camera protocols are:
Option Manufacturer Model
BBV 485 BBV All models
Dennard Dedicated Micros 2040, 2050, 2055, 2060
Ernitec Ernitec Orion Series
JVC JVC TK-C675, TK-676, TKC-C553E
Kalatel Airtech/Kalatel CyberdomeTM
Mark Mercer Mark Mercer Quick Switch, Meridian
Panasonic WV CS600 Panasonic WV CS600
Panasonic WV CS850 Panasonic WV-CS850A, WV-C854, WV-CW860
Pelco-P Pelco Spectra II, Spectra III (twisted pair only)
Philips Bosch / Philips G3 series (RS232)
Samsung Samsung SOC-641
Sensormatic Sensormatic Speeddome IV, V, VI (RS422) & VII (RS422)
Ultrak Ultrak UltradomeTM Kd6
Vantage Vantage Juno Dome
VCL VCL/Ademco Orbiter MicrospheresTM / RapidDomeTM
Vista PD Vista Power Dome
System Logs
There are a number of system logs supported on the unit, these logs can be viewed and used for
Administration purpose.
Each log requires enabling to ensure entries are created by the unit, refer to the Networking Guide
for details on how to enable and view the system logs.
Note:
If a log is not enabled, the option to view this log will not be displayed within this menu.