DS2 Setup Guide
Dedicated Micros ©2007
65
DS2
Passwords
The unit can be password protected to ensure only authorised personnel can gain access to the
conguration menus of the system.
There are a set of default passwords set at the factory. These should be changed as soon as
practical to ensure the security of the unit. These default passwords are;
Webpage Conguration : Username = dm password = web
Video FTP : Username = dm password = ftp
FTP Admin : Username = dmftp password = ftp
Telnet : Username = dm password = telnet
Serial : Username = dmconsole1 No password as default
User password
Installer password
Playback Password
Off
Off
Off
On, Off
On, Off
On, Off
User password
This ensures only an authorised user with the correct password can gain access to the User
conguration menus; ‘System Status’, ‘Time, Date, and Language’ and ‘Schedule’.
Note:
All other menus are within the Installer operation.
Installer password
The Installer password allows authorised users to enter, congure and view all of the menu pages
on the unit.
Playback Password
When the Playback password is set to On, a password must be entered before images can be
played back. The Playback password will be the same as was set for the User Password.
Warning:
For security, lost passwords can only be reset by returning the unit to Dedicated Micros.
To set the password:
1. Set the User / Installer / Playback option to On.
2. Enter a password, which can be up to 9 digits long.
3. Re-enter the password. Once set, the password must be correctly entered to access the
menus.
Make a note of your passwords here:
User / Playback password: .................................
Installer password: .................................