DS2 Setup Guide

Dedicated Micros ©2007
63
DS2
Display Options
P in P position
Quad sequence
Main monitor text
Spot monitor text
Text background
Sequence dwell
Multiscreen interlace
Multiscreen titles
Display unit number
Base camera number
Top left
Segment
Both
Both
On
05 secs.
On
On
On
001
Top left, Top right, Bottom left, Bottom right
Segment, Page
Both, None, Clock only, Title only
Both, None, Clock only, Title only
On, Off
01 - 99 secs
On, Off
On, Off
On, Off
000 - 999
Display
O
ptions
Picture in Picture Position
This determines where the PinP will appear on initial selection of feature. The options are top left or
right and bottom left or right.
Quad Sequence
It is possible to decide the sequence format of the Quad display:
• A whole page (all segments) can sequence 1, 2, 3, 4 then 5, 6, 7, 8.
• A single segment at the bottom right of the screen, e.g. 1, 2, 3, 4 then 1, 2, 3, 5.
Main Monitor Text
It is possible to select the text that will be displayed on the main monitor. The options are:
• None - switch all monitor text off (when used in conjunction with display unit number).
• Clock only - display the time, date and mode of operation (Day, Night, Weekend and Spot).
• Title only - display the camera number, the unit number, camera title and the mode of
operation.
• Both - display both the clock and title information.
Spot Monitor text
It is possible to select the information that will be displayed on the Spot monitor. The options are:
• None - switch all monitor text off (when used in conjunction with display unit number).
• Clock only - display the time, date and mode of operation (Day, Night, Weekend and Spot).
• Title only - display the camera number, the unit number, camera title and the mode of
operation.
• Both - display both the clock and title information.