DS2 Setup Guide

Dedicated Micros ©2007
44
DS2
Bandwidth selection
PPP selection
Viewing Resolutions
Secondary web server port
Primary DNS
Secondary DNS
Edit
Edit
Edit
0000
000.000.000.000
000.000.000.000
0000-9999
More Network
O
ptions
Bandwidth Selection
It is possible to set maximum limits for the bandwidth utilisation on the Network port of the unit.
Force 10 BaseT operation
Type
Max Trans Rate
Tx Image Buffers
Ethernet MTU
Ethernet re-tx t/o
Disabled
LAN
010000 KBits/Sec
3
1500
0250ms
Disabled, Enabled
CUSTOM, LAN, WAN, ISDN
000001-100000KBits/S
1 - 3
576 - 1515
0000 - 5000ms
Bandwidth
S
election
Force 10 BaseT Operation
The unit supports a 10/100Mbps auto detecting connection, however this option forces the network
port on the unit to be a 10BaseT connection if the local hub/switch requires this.
Type
The unit can be congured for a specic value or it can be set to a default network setting, for
example a WAN connection would automatically set the speed of the network port to 32Kbytes/
second.
This will ensure the speed of the data from the unit does not exceed the speed of the network
connection.
The options available are:
Custom This will allow the Administrator to select specic values.
ISDN This will set the maximum transmission rate to 64KBits/second for remote network
connection via an ISDN link, it will also automatically alter the transmit image buffers and
Ethernet re-transmit timeout.
WAN This will set the maximum transmission rate to 256KBits/second, and automatically alter the
transmit image buffers and Ethernet re-transmit timeout.
LAN This will set the maximum transmission rate to 010000KBits/second for a local network
connection, and automatically alter the transmit image buffers and Ethernet re-transmit
timeout.
Max Transmission Rate
This is a read only setting and shows the maximum transmission speed for the type of network
selected.