DS2 Setup Guide

Dedicated Micros ©2007
40
DS2
Camera Prole Selector
MultiMode recording offers the ability to set different recording rates, resolutions and compression
across scheduled, normal and alarm modes, or to mix a standard setting for many cameras with
individual settings for particular cameras and time of day. By varying the quality (bitrate) of the
recorded image, users can increase recording capability of the unit.
The unit provides a Prole Wizard via the web pages which guides you through the conguration of
MultiMode in simple steps. It can also be congured using the OSD.
Camera
Units PPS
Record Operation
Normal Profile
Event Profile
Pre-trigger rate
Pre-trigger time
Profile Description
Profile Parameters
Camera 01
Day
Off
N/A
N/A
00 PPS
000 Secs
2CIF MED
704x256 25PPS High 02
Night
Profile
MPEG05
MPEG04
Weekend
Standard
N/A
N/A
Off, Standard, Profile
N/A, <Profile>
N/A, <Profile>
C
amera Profile
S
electo
r
Units
The settings within this menu can be congured in either the number of Pictures Per Second or
Milliseconds. Using the move the cursor to the PPS option, use to select ms (milliseconds).
Note:
Use milliseconds to take less than 1 picture per second.
Record Operation
This allows the record, alarm rate and alarm pictures to be determined when variable recording is
enabled. The options available are:
• Off - Camera not recording.
• Standard - uses settings applied within the Standard Record menu.
• Prole - allows an individual prole to be selected for each camera
Normal Prole
Note: This is only active when the Record Operation is set to Prole.
This identies the recording prole for the unit in non-alarm (normal) mode. Use the keys to
scroll through the available options, these are:
MPEG01 to MPEG12
JPEG01 to JPEG12
When this option is highlighted additional information will display on the screen and it is also
possible to access the edit prole screen by pressing the PLAY button, see below for more
information.