DS2 Setup Guide
Dedicated Micros ©2007
36
DS2
Standard Recording Schedule
The record rate and the image size determine how long cameras can be recorded for and the
update rate for each camera. Settings can be applied to day, night and weekend schedules.
The maximum record rate for the unit (Standard and Alarm) is 100PPS for PAL standard cameras
and 120PPS for NTSC standard cameras. This rate is spread across all connected cameras.
The screen displayed for the Standard Record settings will depend on whether the Schedule Rate is
enabled and the Schedule function has been enabled for Day, Night and Weekend Operation mode.
With the Schedule Rate function disabled, the record rate is the permanent record rate for the
cameras enabled for recording.
Note:
The standard record rates set for each of the operation modes are the number of pictures
per second across all cameras enabled in standard recording.
Units PPS
Day
Night
Weekend
Image Size
Record Cameras
No. 5 second events per hour
Record Duration
Maximum Storage (Protected%)
Earliest unprotected recording
Edit
000
--Days --Hours
0000GB(00%)
20/Aug/2006 23:55
Edit
006
006
006
Record
rate
Unchanged
Unchanged
Unchanged
Medium
Event
Mode
006
006
006
Event
rate
Both
Both
Both
18KB
Event
Active
Disabled, Alarms,
Activity, Both
Disabled, Alarms,
Activity, Both
Disabled, Alarms,
Activity, Both
05-45KB
Exclusive,
Unchanged, Interleave
Exclusive,
Unchanged, Interleave
Exclusive,
Unchanged, Interleave
S
tandard Recordin
g
S
chedule
Units
The settings within this menu can be congured in either the number of Pictures Per Second or
Milliseconds. Using the move the cursor to the PPS option and use to select ms (milliseconds).
Standard and Event PPS
Select a record rate in pictures per second (PPS) to be recorded across all enabled cameras. The
Standard Record rate will be the number of PPS recorded when the unit is in non-alarm mode. The
unit will switch to the Alarm rate when an alarm is triggered.
Note:
The maximum record rate is 25PPS/30PPS (PAL/NTSC) for a single camera.
The default record rate is 6PPS (00167 ms), which is equivalent to a VCR in 24-hour time lapse
mode. For ease of use the following table demonstrates the equivalent record rates of a typical VCR
time-lapse mode.