DS2 Setup Guide

DS2

7 Day Timer

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

Timed

24Hr Day

24Hr Night

24Hr Day

Day

09:00

Night

18:00

24 Hr Day

This enables the unit to record using the Day settings at all times.

24Hr Night

This enables the unit to record using the Night settings at all times.

Timed

The schedule will enable the Day settings during a set period and then switch automatically to the

Night settings at a programmed time. The diagram shows that the unit will be active with the Day

settings from 09:00 on Monday until it switches to the Night settings at 18:00. This is repeated each

day until Friday when the settings will be switched to Day then over to Night settings on Saturday

and back to Day on Sunday.

Weekend

The weekend option allows times to be congured to determine when the weekend settings would

be applied.

The options are:

• On between - this allows the start and end times to be set when the weekend settings will

be applied.

• Off - When the weekend option is off the weekend setting will never apply.

Keyswitch

The input which activates the keyswitch can be congured for one of the following options:

• None - There is no keyswitch operation enabled.

• Direct - The direct input on the rear panel has been allocated as the keyswitch trigger.

• Aux - The Aux input on the rear panel has been allocated as the keyswitch trigger, select a

contact.

• Module 01 - Module 16 - select any input on any module to be the keyswitch trigger.

The keyswitch is used to change the unit from one time mode (Day, Night, Weekend) to another

when the input programmed in the settings is activated. If the unit is in Day mode operation, when

the input is received the unit will switch to Night mode. If it is in Night mode the unit will still switch

but it will remain in Night mode. If the unit is in Weekend mode again the unit will switch but remain

Weekend mode.