DS2 Setup Guide

Dedicated Micros ©2007
31
DS2
Time, Date & Language
Time & Date
Date Format
Language
System shutdown
Timezone
15:38 22/11/2005
Day, Month
English
Disabled
Greenwich Mean Time GMT +0
Month, Day
See below for full list
Enabled
Time, Date
&
Lan
g
ua
g
e
Date
As default, the date is entered DD:MM:YYYY, this can be changed using the Date format option
below.
Time
The time should be entered in 24 hour format (HH:MM).
Note:
The Daylight Saving Time setting is indicated by ‘S’ for summertime and ‘W’ for wintertime
Language
The menus on the unit can be displayed in English, French, German, Spanish, Italian, Russian,
Czech, Polish, Dutch, Hungarian, Swedish, Croatian, Finnish and Chinese.
System Shutdown
The unit can be shutdown from this menu.
Some menu changes would require the unit to be reset, for example changes within the System
Features menu.
To reset the unit:
1. Use the
key to highlight the ‘System Shutdown’ option.
2. Select Enable, a prompt will be displayed.
3. Press and hold the Camera 1 key for 5 seconds. The unit will shutdown, where a prompt will
appear to say you can switch the unit off.
To abort the reset, press the Menu or Mode key.
Note:
Shutting down the unit by any other method will put the integrity of your DVR at risk.
If the unit is shut down in any uncontrolled manor (power off at mains or removing the
power lead) more than 5 times in one hour, it will go into Engineering Bootloader mode for
approximately fteen minutes and then will reboot in normal mode.
Tip:
The unit can be restarted from the ‘System Shutdown’ option by pressing and holding
Camera 4.
Time Zone
There are numerous time zones supported on the unit, select the zone for where the unit is installed
so the time and date will reect the local time and will change in conjunction with Daylight Saving
Time.