DS2 Setup Guide

Dedicated Micros ©2007
14
DS2
Simple Installation
The unit can be installed in as little as 4 steps, and cameras connected to the unit will be detected
and begin recording automatically.
Rear Panel connections
The illustration shows the rear panel connections.
SERIAL 1
SERIAL 2
SERIAL 3
SERIAL 4
TERM
485 BUS
AUX ALARMS
AUX RELAYS
R1
R2
DIRECT
-
+
1 2 3 4 5
SCSI
NET
AUDIO 1
AUDIO 2
MON A
MON
VID 1 VID 2 VID 3
VID 4 VID 5
VID 6
VID 7
VID 8 VID 9 VID 10 VID 11 VID 12 VID 13 VID 14 VID 15 VID 16
IN
IN
B
A
OUT
OUT
(BUS A)
(BUS B)
Video
VID1 to VID16 75Ω BNC composite camera connections (1V pk-pk) DS2 is
available as a 6, 9 or 16 channel.
MON A Main monitor, 75Ω BNC composite monitor connection
(1V pk-pk).
MON B Spot monitor, 75Ω BNC composite monitor connection (1V pk-pk).
MON A Main monitor, S-video monitor connection.
Audio
AUDIO 1 IN RCA (phono) socket, 22KHZ sampling, 47 KΩ input impedance.
- records Camera 1
AUDIO 1 OUT RCA (phono) socket - Live Challenge
AUDIO 2 IN RCA (phono) socket , 22KHZ sampling, 47 KΩ input impedance.
- records Camera 2
AUDIO 2 OUT RCA (phono) socket - Control Room Monitor
Data
SCSI 50-pin HD SCSI-2 connection.
NET RJ-45 100-baseT Ethernet connection.
SERIAL 1 & 2 9-way (Male) D-type RS-232 serial port
SERIAL 3 & 4 (BUS A & BUS B) 9-way (Male) D-type RS-232, RS-422 and RS-485 serial port.
TERM Termination DIP switches for RS-485.
485 BUS 2x MMJ ports for DM 485-BUS accessories.
Alarms and relays
R1 Screw terminal, alarm relay dry contact, NO/NC, congurable for
alarm.
R2 Screw terminal, activity relay dry contact, NO/NC, congurable for
VMD.
DIRECT Screw terminal, direct auxiliary input, NO/NC.
AUX ALARMS 25-way (Female) D-type programmable alarms, NO/NC.
AUX RELAYS 9-way (Female) D-type, congurable for global camera fail and
trigger on alarm.