User Guide
Dedicated Micros ©2007
6
KBC1/KBC2
Connecting The Keyboard
Before you start
Supported Dedicated Micros products
The following DM products are fully compatible with the KBC1/KBC2 keyboards
SD DVR
NetVu Console
DV-IP RT Server
High Vu
Note: All KBC1/KBC2 connectivity is via an RJ12 cable. If connection to a 485-bus product is
required (i.e. a DM NetVu connected DS2 DVR), please refer to the DM KBS3A keyboard.
Connecting To NetVu connected products
Local Connection
Both the KBC1 and KBC2 are supplied with an RJ12 cable. All Data and Power connections are
provided over this. If connection is required over a distance greater than 5 metres, an additional
local power supply connection is required.
Remote Connection
Both the KBC1 and KBC2 can be connected to a DVR over a distance of up to 1km, using a
screened twisted pair cable. This conguration will require a breakout cable connection and a
keyboard Power Supply Unit (PSU).
An Accessory kit (ref no:DM/KBC/ACC) enables remote connection using dual break out boxes and
a remote PSU.