Setup guide

57
ENGLISH
Appendix 2
Using the remote control
The remote control included with the Digital Sprite 2 duplicates the front panel.
See the operator card for details.
To use the remote control, the ‘IR receiver’ option needs to be enabled in the
‘System Options’ menu page.
MODE
GOTO
EVENT
SPOT
1
5
9
13
2
6
10
14
3
7
11
15
4
8
12
16
HOLD
UNIT
SELECT
The remote control provides the following functions:
UNIT SELECT Press UNIT SELECT followed by a
camera key to log onto another unit.
Note: The remote control does not have the ability to
control a DM video switcher.
MODE Press to toggle Spot mode on and off, or
to return to Live mode when playing
back.
HOLD Toggle freeze frame On and Off.
SPOT Toggle Spot mode on and off, Selects
operation of the spot monitor.
EVENT Press to display the Event log.
GOTO Press to display the Goto time option.
1 - 16 Camera selection keys.
Use to control the cursor in menus,
or scroll around the screen when in
zoom mode.
Note: If multiple Digital Sprite 2 units are networked together via the 485 bus
in the same location, it will be necessary to disable the ‘IR receiver’ option in
the System Options menu on all but one of the units.