Setup guide

48
ENGLISH
48
Report VMD Activity
A VMD activity trigger can be reported via an telnet message. If this option is
enabled, the ‘Remote Reporting’ settings must be correctly configured.
Create Zone Input
This turns the VMD camera into an alarm input for use in the Alarm Zones
page. Select VMD XX (where XX is the camera number) instead of an alarm
input to trigger the event.
Record Still Image
This will save an additional still image as close to the event as possible
alongside the normal video recordings of the event.
The still image is accessed via the ‘Live’ page of the web viewing interface,
where it appears in the regular sequence of normal recordings.
Protect VMD Images
It is possible to automatically protect VMD recordings to ensure these images
are not overwritten and remain on the hard drive of the unit. Images can be
protected for a set period of time or indefinitely.
Archive Event
This will force the Digital Sprite 2 to automatically download the alarm images
via FTP to a central FTP Server, or directly to a local CD/DVD.
Refer to the Archive on Event in the Record Options menu.
Email image
It is possible to configure the Digital Sprite 2 to automatically transmit an
e-mail, to a pre-configured address, on identification of motion.
Email Image Resolution
This identifies the resolution of the snapshot that will be attached to the e-mail,
the options are:
• Thumbnail - Default.
• Low Resolution.
• Medium Resolution.
• High Resolution.
Note: The resolution selected is a global parameter and will be common to all
Zone and VMD alarms.
Apply actions to
If the actions for cameras are the same or similar, it is possible to apply one
set of actions to other selected cameras. Selecting this option will display a
confirmation screen.
Advanced VMD Zones
This option allows the advanced VMD zones 1 to 16 to be configured for each
camera. Enable the option and select Edit.
Note: VMD 0 is reserved for activity detection.
Apply configuration of
Camera 1
actions to
Camera 2
Confirm Cancel
Camera 01 VMD Zones
Camera 01
VMD zones Edit
VMD test Walktest
VMD grid Setup