Setup guide

ManualsBrandsDedicated Micros ManualsMusical equipmentDigital Sprite Lite

ENGLISH

Actions

Actions to be automatically activated when VMD is identified can be configured

within this menu.

Page

The actions are separated into two pages. Navigate between them by

highlighting ‘Next Page’ and pressing the or button.

Create Database Entry

Enable this option to log VMD activity in the Event List.

Change Record Rate

This allows the record rate to be switched to the alarm rate when VMD is

active. The options available are:

• Standard - switches cameras enabled for standard recording to the alarm

record rate.

• Variable - switches cameras enabled for variable recording to the alarm

record rate.

• Both - applies to both the variable and standard recording of the selected

camera.

Camera 01 VMD Actions

Create database entry

Page Next Page

Enabled

Change Record Rate None

Create zone input

Archive event

Email image res.

Disabled

Thumbnail

Report VMD activity

Protect VMD images

Disabled

Record still image

Email image

Disabled

None, Standard, Variable, Both

Disabled, Enabled

Thumbnail, Low res., Medium res., High res.

Disabled, Enabled

Camera 02 - 16, All cameras

Apply camera 01 actions to Camera 02

When you enter the Activity Grid screen, a 16 x 16 grid will overlay the image.

Edit the grid so that it covers the areas of the image that require monitoring for

activity detection and remove the monitoring from the areas where there may

be continuous movement (e.g. trees, bushes) causing false triggers.

Each cell can be individually enabled or disabled with the Camera 1 button.

Alternatively it is possible to latch the cursor and select a group of cells to

enable / disable. To latch the cursor, move it to the required start location and

press Camera 2. Use the cursor keys to move across the cells to be enabled /

disabled and then press Camera 1 to toggle all the selected cells on or off.

Activity Test

Once the Activity Camera Setup settings have been configured, it is possible

to test the settings for each camera.

Select ‘Walk Test’. The areas where the activity grid is enabled will highlight

when activity is detected.