Setup guide

45
ENGLISH
Input Source
Select whether the alarm contact on the alarm device is normally open (N/O)
or normally closed (N/C).
Preset
Camera telemetry presets can be automatically recalled when an alarm is
triggered. Enter the preset number from 000 to 256 for the selected alarm
contact.
Zone Input
It is possible for a camera specific alarm to also trigger an alarm zone. If the
input is to trigger a zone as well as send a camera to a preset position enable
the corresponding Zone Input box.
The trigger will appear under ‘Presets’ in the Zone Setup menu.
Note: If the option is disabled, the alarm will still send a camera to a preset
position but no further action will be taken.
Alarms and Presets
Camera XX
The currently selected camera number is displayed, along with its status –
detected or not detected. Press a camera button to to configure alarms and
presets for that camera.
Pulse Extension
The pulse extension extends the trigger period to avoid double triggers of the
same alarms occurring, i.e. if a second incident of alarm is received after the
first alarm is finished, but still within this period, the unit will not create a new
event.
Module / AUX
Select whether you are using an external alarm module or the AUX inputs on
the Digital Sprite 2. Up to 16 alarm modules can be connected to the 485-bus
network. Select the relevant module number or Aux (the default setting is the
Aux input).
Contact
This setting identifies which contact the Aux or Module selection relates to.
Each alarm module has 16 alarm inputs, each input can be used by any
camera, or by multiple cameras.
Alarms and Preset
Pulse extension
Camera 1 - Detected
>
Aux
Module
/Aux
--
Contact
000
Preset
N/O
Input
Source
Zone
Input
005 secs
01 001N/C
- - 000N/O
02 002N/C
- - 000N/O
04 003N/O
- - 000N/O
>
01
>
---
>
02
>
---
>
03
>
Aux
000 - 999 secs