Setup guide

4040
ENGLISH
40
From
Enter the date and start time for the period containing the recorded images.
To
Enter the date and end time for the period to be protected.
Protect Images
Select how long, in days, the images will be protected. Press the button to
confirm the settings. You will be prompted to confirm the settings, highlight
‘Confirm’ and press the Menu or Mode key. The images within the time period
will be displayed within the list section.
Protect Images
This allows the settings to be confirmed, press the button to confirm, you
will be presented with a prompt to confirm the settings, highlight ‘Confirm’ and
press the Menu or Mode key. The images within the time period will be
displayed within the list section.
Note: It may take some time to add protected images to the list.
Unprotect Images
It is possible to manually un-protect images that have either been
automatically protected or manually protected. Once the time and date
information has been entered highlight the ‘Unprotect Images’ option and press
. You will be presented with a prompt. Highlight ‘Confirm’ and press the
Menu or Mode key. The entries within the list section will be removed.
Note: It may take some time to remove protected images from the list.
List
This shows all images that are protected. It is possible to highlight one of the
entries in the list so that this can be copied to the Archive List. Using the
keys highlight the relevant entry and press the COPY button. The
file will be saved to the Archive List.
Record Options
Timed expiry
Images recorded onto disk can be programmed to expire after a user-defined
number of days and hours. This option has been designed to assist where the
Installation requirements define the recorded images must adhere to legislation
on retaining images for a maximum record time, for example 31 days.
Warning: Once the timed expiry has been set, all images older than the
selected time will be no longer available.
Disk configuration
The Disk configuration option displays the total size of the hard disks, before
they are formatted for use with the Digital Sprite 2.
Image protection
It is possible to protect images stored on the Digital Sprite 2 hard drives. These
images will not be overwritten.
Image Protection
From:
01/11/2004
24/11/2004
01 Days Confirm
Confirm
Confirm
To:
12:16:00
12:20:00
Protect images
Protect images
Unprotect images
List
05/11/04 14:39:39 - 05/11/04 16:50:31
05/11/04 09:48:01 - 05/11/04 10:24:15
25/11/04 17:14:54 - 25/11/04 17:51:04
Press 1, 2 to page up down
Record Options
Timed expiry 0000 Day(s)
0000 - 9999 Days
Archive on event Disabled
Disabled, Enabled/Edit
Record text in image
Schedule rates
Disabled
Enabled
Image protection Edit
Enabled
Disabled
Record mode Standard loop
Standard loop, Write once
Event database config Edit
Disk configuration Edit