Setup guide

ENGLISH

The supported PTZ / Dome camera protocols are:

System Logs

There are a number of system logs supported on the Digital Sprite 2, these

logs can be viewed and used for Administration purpose.

Each log requires enabling to ensure entries are created by the Digital Sprite 2,

refer to the Networking Guide for details on how to enable and view the

system logs.

Note: If a log is not enabled, the option to view this log will not be displayed

within this menu.

Status Page

It is possible to switch the status page off on the Digital Sprite 2.

The status page will detail any alarms on the system, camera failure, main

storage (protected) and the earliest unprotected recording.

System Logs

PPP connections Disabled

Disabled, Enabled View

Illegal file access Disabled

Disabled, Enabled View