Setup guide

14
3. Use the cursor to highlight the minute settings.
4. Use the cursors to change the settings, in this example 12:30.
5. Use the cursor to return to the left-hand side of the page and select another
option. Or, press and hold menu to exit the menu.
Time, Date & Language
Date
As default, the date is entered DD:MM:YYYY on PAL models and MM:DD:YYYY
on NTSC models, this can be changed using the Date format option below.
Time
The time should be entered in 24 hour format (HH:MM).
Note: Summer and Winter time is signalled by an ‘S’ or ‘W’ next to the time.
Date format
The date format can be changed from Day, Month to Month, Day depending on
regional preference.
Language
The menus can be displayed in a number of languages. Upon selection these are
presented as a dropdown list.
Note: When the time and date is displayed as ‘External clock’ the time and date
settings are being taken from unit 1 on the 485-Bus network.
WARNING: Images may be overwritten if the time or date is adjusted whilst
re c o rding is in pro g re s s .
Time, Date & Language
Date 31/04/2002
Time W 12:00
Date format Day, Month
Language English
DST Auto
System Shutdown Disabled
00
Time, Date & Language
Date 31/04/2002
Time W 12:00
Date format Day, Month
Language English
DST Auto
System Shutdown Disabled
30
Time, Date & Language
Date 31/04/2002
Time W 12:00
Date format Day, Month
Language English
DST Auto
System Shutdown Disabled
30
Time, Date & Language Date 01/05/2002
Time S 12:00
Date Format Day, Month Month, Day
Language English Français, Deutsch, Espanól, Italiano
System Shutdown Disabled Enabled
DST Auto Manual
7211 DigitalManual Update 10/4/02 5:12 pm Page 14