Manualshelf

Setup guide

ManualsBrandsDedicated Micros ManualsMusical equipmentDigital Sprite Lite
919293949596979899100
Page 92 Dedicated Micros
Relay Test Page
The relay test page allows you to test the onboard relays and the additional
relay modules. The Digital Sprite 2 supports three onboard relays and up to two
additional relay modules, these modules have sixteen relay connections each.
To test the relay select the tick box adjacent to the relay number, save the configuration. Press
the OK button and this will trigger the corresponding relay.
Note: If the onboard relays have been configured to have the default settings it will
not be possible to test these, the corresponding text box will be disabled.
Function Description
Global Alarm – R1 This identifies if the unit has relay 1 enabled for global alarm
functionality, the relay will also be disabled for test.
Global VMD – R2 This identifies if the unit has relay 2 enabled for global VMD
functionality, the relay will also be disabled for test.
Global Camera Fail –
R3
This identifies if the unit has relay 3 enabled for global camera fail
functionality, the relay will also be disabled for test.