Setup guide

Page 90 Dedicated Micros
There are a number of tools that are supported on-board the Digital Sprite 2 itself. These can be
accessed through the web interface and are available for testing system parameters and
obtaining information for fault finding.
To access the Tools option:
1. Select the Configuration option on the web interface.
2. Enter the username and password (default setting dm and web).
3. Select the Tools tab, the tools available are:
Video Scope
Audio Trace
Relay Test Page
Watermarking
System Variables
Reset
Video Scope
The Video Scope page shows a trace of the video content (RGB) of the overall
image. It will give the RGB values of the selected image.
It is possible to select any of the video inputs on the Digital Sprite 2 to view the
video contents. It is also possible to select the resolution of the image and
compare the RGB levels.
Clicking within the video image will select a line of video and identify the value for that line rather
than the overall image.
Digital Sprite 2 Tools