Setup guide

Dedicated Micros Page 83
How to Enable System Logs
There are numerous actions that the Digital Sprite 2 can be configured to
automatically carry out on receipt of; an alarm, VMD activation, Schedule
function, etc. When these triggers are received and the actions initiated then it
is possible to log this information within the Digital Sprite 2 System Logs.
By default the Digital Sprite 2 will log illegal file access and telnet/FTP users, to enable the other
functions:
1. Select Logs -> System Logs Set-up.
2. If connect/dial using PPP has been configured within the alarm and VMD pages enabling this
option will log all the PPP actions.
3. If the Digital Sprite 2 has been configured to transmit file to an FTP server enabling this
function will log all FTP transactions.
4. Save the configuration by selecting Save Settings!
Function Description
Log PPP connections This enabled logging of WAN connections using the PPP ports and
records the IP address, the profile used and the local time of the
attempted connection.
Port, Type, Application,
Use
This identifies the default ports and their functionality that is
supported on the unit.
Log anonymous FTP
connections
This identifies when an unauthorised user tries to access the Digital
Sprite 2 by entering anonymous in the username or password.
Log illegal file access Any web access to a CGI protected directory or non-existent file will
be logged with an IP address, time and type of action.
Log Telnet/FTP users This will log users that are trying to gain access to the Digital Sprite
2 using an FTP or telnet session.
Note: For configuration via the OSD refer to Appendix G where all menu options are
described.