Setup guide

Page 78 Dedicated Micros
How to Configure the Onboard Firewall
The Digital Sprite 2 supports an on-board Firewall to add to the security of the
unit. The Firewall can be enabled and work in conjunction with the security
applications that are already present in the network.
This feature ensures that unauthorised users can not gain access to the Digital
Sprite 2 and therefore have any affect of the operation of the system. With IP
address and port filtering the firewall has been designed to let the authorised
people access and keep everyone else out.
To configure the firewall functionality:
1. If the web Firewall page is not already enabled, enable the Firewall function within System ->
Advanced Features and Reset the unit for the settings to take affect.
2. Select Network -> Firewall.
Function Description
Number of lines in
Image
This is the number of lines that will be displayed in live and replay
(via the web pages) along with the relevant images. The default
setting is 10 lines.
Line length This identifies the length of the lines that will be stored with the
image. The default setting is 80 characters which is generally the full
screen.
Number of visible lines To enable the text information to be viewed in the Live page it is
necessary to identify the number of visible lines.
Note: When viewing video in Live view (Active X only) it is possible to left mouse
click over the image and the text information is superimposed over the image.
Note: The Firewall function is always enabled on the Digital Sprite 2.