Setup guide

Page 74 Dedicated Micros
6. If Weekend operation is to be active, enable the option and configure the start and end
times, weekend settings will be applied to the recorded video during this time period.
7. Select the schedule type from the drop down list.
8. Disabling the record schedule rates would result in the day, night and weekend record
settings being replaced by a single ‘Rate’ record setting.
9. Configure the Operation mode titles, defaults are Day, Night and Weekend.
10. If the keyswitch is to be functional, enable the option.
11. Select the input that will be used to trigger the keyswitch.
12. Select whether the keyswitch is normally open (default) or normally closed.
11. Save the configuration by selecting Save Settings!
Function Description
Schedule This is a seven day schedule that allows alarms and VMD to be enabled
or disabled at times during the day.
DAYTime This identifies the time when the Digital Sprite 2 will switch to Day
operation mode.
NIGHTTime This identifies the time when the Digital Sprite 2 will switch to Night
operation mode.
Function Description
Weekend Enabled Enabling this option will switch the unit to weekend mode settings at the
time and date selected.
Weekend Start /
End
This identifies the time period when the unit will be in weekend operation
mode and weekend settings will be applied.