Setup guide

Dedicated Micros Page 71
To unprotect existing protected images:
1. Select Alarms/VMD – Alarm Image Protect/Unprotect.
2. Highlight the recorded file in the protect image partition summary.
3. Select un-protect images, this will remove the protection from the files, release the hard disk
space these files where stored in and the files will now be overwritten.
Function Description
Start Date and time This allows you to enter the start time and date for the period you wish
to search for recorded images.
End Date and time This allows you to enter the end time and date for the period you wish to
search for recorded images.
Protect Image
Partition Summary
The recorded files will be displayed within this area. These are then
selected to either unprotect or protect.
Unprotect Images Any images that have been previously protected and are selected in the
protect image partition summary section will be unprotected, these files
will then be overwritten.