Setup guide

Page 66 Dedicated Micros
Function Description
Destination
Number
This is the GSM number for the mobile to receive the message. The
format should be entered in international format including the country
code and local area code.
Destination URL This can be the URL or the IP address of the SMS Server when utilising
SMS over TCP/IP. The messages will be sent over an Ethernet link if
present, alternatively it will be sent over the GSM network.
SMS Server This will enable the Digital Sprite 2 to accept and log SMS messages.
Note: The Verbose option must not be enabled when this option is
selected.
Report startup This will enable the Digital Sprite 2 to transmit a message on power up
of the unit.
Report alarms Sends a text message on receipt of an alarm via the onboard or
additional alarm inputs.
Report camera fail If any of the enabled video inputs on the Digital Sprite 2 does not detect
a 1 volt peak-to-peak signal then the unit will send a SMS message.
Report VMD
activation
If VMD is identified on any of the enabled video inputs the unit will send
a SMS message.