Setup guide

Dedicated Micros Page 63
How to Configure SMS Text messaging
The Digital Sprite 2 supports the function to send an SMS text message to a
mobile phone.
This gives the ability to automatically or manually action the Digital Sprite 2 to
send a text to inform a Guard of incident when they are away from the
monitoring station, i.e. Security check of the site, mobile security units, making
sure the site is monitored 24/7 whether the Guard is at the site or mobile.
The typical process for SMS messaging is:
The Digital Sprite 2 will send a message to the mobile phone. This can be on receipt of an
alarm or manually initiated.
The operator then has the option to send a message back to the Digital Sprite 2 or log onto
the unit using the web interface or Viewer software.
Function Description
Manual only The archive process will commence when the User initiates the action
by pressing the ‘Start Download’ button.
Clear video
protection after
download
This automatically clears the image protect from the images that are
successfully downloaded.
Watermark each
partition after
download
This enables a watermark to be generated and stored in a text file
downloaded with the video to the FTP server for each image partition,
this watermark is logged in the log file.
Server Directory This is the main directory on the FTP server where the images will be
stored. The Root Drive/Directory will be created under this main
directory. This is read only.
Start Download This allows the user to manually start the download process.
Note: Delivery of an SMS message can not be guaranteed. This is a limitation of the
communications network providers not with the Dedicated Micros Digital Sprite 2.