Setup guide

Dedicated Micros Page 59
Function Description
Primary Host This is the IP address or name of the initial host that the Digital Sprite 2
will transmit an alarm message to.
Secondary Host If the Digital Sprite 2 is unable to contact the primary host then it is
possible to identify an alternative route and a secondary host.
If there is only one alarm receiving IP address, you must enter the
details in both the primary and secondary connection settings.
Profile This is the medium that the Digital Sprite 2 will use to make the
connection to the primary or secondary host.
Note: If the connection is via the serial port the profile will be the
username configured in the ‘profiles’ file in the \etc directory on the
Digital Sprite 2.
Public (NAT) IP
Address
This is public IP (or domain name) for a unit connected to the Internet
via a NAT Router or Firewall. This field should be left blank if NAT is not
used e.g. on a private network.
Video Server Port
(port forwarding)
This field allows the ARC to connect to the unit through a router that is
using port forwarding e.g. if the video server does not appear on port 80
(HTTP) to the external network.