Setup guide

Page 52 Dedicated Micros
Function Description
Select Camera Select the camera that is to be configured.
Pulse extension The pulse extension extends the trigger to avoid double triggers of
alarms from occurring, i.e. if a second incident is received, after the first
alarm has finished but within this time period, the unit will not create a
new event.
Module Number This identifies the alarm input that will be the trigger for the camera
being configured, the options available are the Auxiliary input and
Module 1 to 16 for the additional alarm modules that can be connected
to the Digital Sprite 2.
Contact Number The Auxiliary input and the additional alarm modules support sixteen
input contacts any of these can be allocated as the alarm input trigger.
Normally Closed
Contact
The alarm trigger can be configured as normally open (default) or
normally closed.
Preset The preset position is the position the camera will move to when the
alarm is triggered.
Zone Trigger It is possible for a camera specific alarm to also trigger an alarm zone. If
the input is to trigger a zone as well as send a camera to a preset
position this option must be enabled.