Setup guide

Dedicated Micros Page 51
How to Configure Alarm Presets
The Digital Sprite 2 supports the ability to automatically send a camera to a
preset position on the receipt of an alarm.
Within this web page it also possible to identify if the alarm is to be available as
a trigger for an alarm zone. To enable and configure alarm presets:
1. Select Alarms/VMD -> Alarm Presets
2. Select the camera that will be sent to the preset position from the drop down list.
3. Enter the pulse extension in seconds.
4. Select Aux or the Module number from the drop down list that the input will be triggered
from.
5. Select the contact number for the Aux input or the Module.
6. Identify if the input is normally open (not ticked) or normally closed (ticked).
7. Enter the preset position that the camera is to move to when the alarm is triggered.
8. Select whether the alarm is to be available as a zone trigger.
9. Remember to save the configuration by selecting Save Settings!
Function Description
Primary Camera The primary camera is the camera that the unit will take a still image
from for e-mailing on alarm, added to the event database and this will be
the camera that will be the first to be displayed on the Operator monitor.
Goto Preset It is possible to action a camera, to be automatically sent to a preset
position when an alarm zone is triggered, identify the camera and the
preset number.
Close Relay Any of the onboard or external relays can be configured to automatically
close on receipt of an alarm, the options are onboard relays 1 to 6 (if
relays 1 to 3 are not pre-defined within the System -> Relay Set-up
page) and Module 1 Relays 1 to 16.
Email Image When e-mail on alarm is enabled it is possible to attach an image to the
e-mail, the resolution of the image must be defined. It is important to
consider the speed of the link between the Digital Sprite 2 and the
SMTP Server that the e-mail will be sent to. The resolution options
available are; thumbnail, high resolution, medium resolution and low
resolution, the resolution setting is a system settings and will have an
affect on all options that include e-mail attachments.